By using this tutorial you agree to my terms

Here in Alaska a Cashe is used to store food in. They are still used in some villages where there isn't electricity. They are built high on poles and you need a ladder to get to them. So bears and other animals can't get to the food inside.

This was written for PSP 7 but can be done in PSP 6 as well. You can get a trial version of Paint Shop Pro here.

 Download my selections here.

Right click and save to your folder the wood tile. Thank you Jo-Ellen for making it for me.

Open image 800X750

Add new layer each time you use a new selection.

Open selection 01backpoleleft, flood fill with wood tile, scale 200%, Angle 104. Apply inner bevel with these settings, two times.

Log Preset

Width: 31

Smoothness: 32

Depth: 8

Ambience: 0

Shininess: 0

Color: white

Angle: 0

Intensity: 35

Elevation: 45

Use the same setting and bevel for 02frontpoleleft.

Use selection 03backpoleright, flood fill with wood tile, scale 200%, Angle 251. Apply inner bevel using same settings, two times. Do the same for 04frontpoleright.

Open selection 05back, flood fill with #492412.

Open 06braceleft, flood fill with barnwood4, 100%, angle 321.

Trim Preset

Width: 4

Smoothness: 0

Depth: 3

Ambience: -30

Shininess: 25

Color: white

Angle: 315

Intensity: 50

Elevation: 50

Open 07braceright, flood fill with same wood, change angle to 35, apply same inner bevel.

Open 08bottom, flood fill with wood logs05je, scale 200%, angle 0. Click on Color/Adjust/Gamma Correction, use these settings.

Apply Log Preset inner bevel settings, one time.

Open 09endcaps, flood fill with wood logs05je, change the settings to scale 10%, angle 90. Apply Trim Preset inner bevel settings. Apply Gamma Correction.

Open 10shadow, flood fill with logs05je same setting as above. Do not apply bevel. Apply Gamma Correction change setting to 0.56.

Open 11log, flood fill with wood logs05je, scale 200%, angle 0. Apply Log Preset inner bevel one time.

Open 12endposts use same setting as you did for the 09endcaps.

Open 13door, use barnwood4 scale 70% angle 90. Do not apply bevel.

Open 14doorframe. Use barnwood4 scale 100%, angle 90. Apply Trim Preset inner bevel.

Open 15doorframetop. Do same as above just change angle to 0.

Open 16fronttop. Use logs05je. Scale 200%, angle 90. Apply Log Preset two times.

Open 17centerbottomroof. Flood fill with barnwood4 scale 100%, angle 0. Do not bevel.

Open 18leftbottomroof. Flood fill with barnwood4 scale 150%, angle 329. Apply Log Preset.

Open 19lefttoproof. Do same as above.

Open 20rightbottomroof. Do same as above only change angle to 219.

Open 21righttoproof. Do same as above.

Open 22centertoproof. Flood fill with barnwood4 scale 100%, angle 0. Apply Trim Preset.

Open 23toproof. Do same as above.

Open 24floor. Flood fill with logs05je. Scale 25%, angle 90.

Apply gamma correction set at 0.76. Apply Trim Preset Bevel

Open 25ladder1, flood fill with barnwood4, scale 200%, angle 270 Apply Trim Preset bevel.

Open 26ladder2,  do same as above but change angle to 0

Hope you enjoyed doing this. It was fun for me to create.

If you have any problems just click on the mail box.

Need help?? Ask our tutorial support.

(nospam)frozentush@yahoo.com

do to all the spam robots I have had to change the e-mail

just remove the (nospam) from my e-mail.

 Home   Alaska   Tutorials   Super Blade Pro   Friends Terms License